1.产品名称及特点:

Product name and characteristics



2.仪器硬件主要配置:

Main configuration of instrument hardware



2.1 Si-pin电制冷半导体探测器:

Si-pin electrically cooled semiconductor detector



2.2  X光管（专用小焦点X光管）:

X-ray tube (special small focus X-ray tube)



2.3  高低压电源:

High and low voltage power supply



2.4 多道分析器:

Multichannel analyzer



2.5光路过滤模块:

Optical path filtering module



2.6 准直器自动切换模块:

Collimator automatic switching module



2.7滤光片自动切换模块:

Automatic filter switching module



2.8准直器和滤光片自由组合模块:

Collimator and filter free combination module



3.金属镀层专用分析软件:

Special analysis software for metal coating



4.附件:

Annex



5.产品保修及售后服务:

Product warranty and after-sales service







1.产品名称及特点Product name and features:



1.1.  产品名称及型号Product name and model：

（3V x-ray）能量色散X射线荧光光谱仪-------EDX6000E

 Energy dispersive x-ray fluorescence spectrometer-------EDX6000E



1.2.  制造商：苏州三值精密仪器有限公司

Manufacturer：Suzhou sanzhi precision instrument co., ltd



1.3  仪器总价值Total instrument value：   

  数量(quantity)     单位(unit)      金额（value）



    1                    Set                 RMB



1.4  产品型号product model：



EDX6000E











1.5. 工作条件working conditions ：



● 工作温度：15～30℃   ●Working temperature: 15 ~ 30℃



● 相对湿度：40%～80%   ●Relative humidity: 40% ~ 80%



● 电    源：AC220V±5V ●Electric source: AC220V±5V







1.6.产品特点Product features：



     1.6.1 EDX6000E可专门针对金属镀层厚度及成分含量进行分析。

 1.6.1 EDX6000E can analyze the thickness and composition of metal coating.



     1.6.2打破传统仪器直线的设计，采用流线体的整体化设计，仪器简洁大方。

  1.6.2 Breaking the traditional straight line design of the instrument, adopting   the integrated design of streamline body, the instrument is simple and generous.



     1.6.3采用美国最新型的Si-pin探测器，电致冷而非液氮制冷，体积小、数据分析准确且维护成本低。

 1.6.3 It adopts the latest Si-pin detector in America, which is cooled by electricity instead of liquid nitrogen, with small size, accurate data analysis and low maintenance cost.



     1.6.4采用自主研发的SES信号处理系统，有效提高测量的灵敏度，测量更精确。



1.6.4 SES signal processing system developed independently is adopted, which effectively improves the sensitivity of measurement and makes the measurement more accurate.



     1.6.5七种光路校正准直系统，根据不同样品自动切换。

1.6.5 Seven kinds of optical path calibration and collimation systems are automatically switched according to different samples.



     1.6.6多重防辐射泄露设计，辐射防护级别属于同类产品级。

1.6.6 Multi-radiation protection design, radiation protection level belongs to the highest level of similar products.



     1.6.7先进的一体化散热设计，使整机散热性能得到极大提高，保证了核心部件的运行安全。

1.6.7 The advanced integrated heat dissipation design greatly improves the heat dissipation performance of the whole machine and ensures the safe operation of the core components.



     1.6.8独有的机芯温控技术，保证X射线源的安全可靠运行，有效延长其使用寿命，降低使用成本。

1.6.8 The unique movement temperature control technology ensures the safe and reliable operation of X-ray source, effectively prolongs its service life and reduces its use cost.



     1.6.9多重仪器部件保护系统，并可通过软件进行全程监控，仪器工作更稳定安全。



1.6.9 Multiple instrument components protect the system, and the whole process can be monitored by software, which makes the instrument work more stable and safe.



     1.6.10专用测试软件，标准视窗设计，界面友好，操作方便。

1.6.10 Special test software, standard window design, friendly interface and convenient operation.



1.6.11采用USB2.0接口，有效保证数据准确、高速的传输。

1.6.11 The USB2.0 interface is adopted to effectively ensure accurate and high-speed data transmission.



2.仪器硬件主要配置Main configuration of instrument hardware：



2.1 Si-pin电制冷半导体探测器



2.1 Si-pin electrically cooled semiconductor detector： 



2.1.1. Si-pin电制冷半导体探测器；分辨率:149±5eV。

2.1.1. Si-pin electrically cooled semiconductor detector: Resolution: 149±5eV.

2.1.2. 放大电路模块：对样品特征X射线进行探测，将探测采集的信号进一步放大。



2.1.2. Amplification circuit module: detect the characteristic X-ray of the sample, and further amplify the detected signal.



2.2  X光管（专用小焦点X光管）:

2.2  X-ray tube (special small focus X-ray tube)：



2.2.1 灯丝电流：1mA。



2.2.1 Filament current: 1mA max.



2.2.2 属于半损耗型部件，设计使用寿命大于10000小时。

2.2.2 It belongs to semi-loss type parts, and the designed service life is more than 10000 hours.



2.3  高低压电源High and low voltage power supply: 



2.3.1.电压输出：50kV。  2.3.1. Maximum voltage output: 50kV.



2.3.2.最小5kv可控调节。    2.3.2. Minimum 5kv controllable adjustment.



2.3.3.自带电压过载保护。    2.3.3. With voltage overload protection.



2.4 多道分析器Multichannel analyzer: 



2.4.1. 将采集的模拟信号转换成数字信号,并将处理结果提供给上位机软件。

2.4.1. The collected analog signals are converted into digital signals, and the processing results are provided to the upper computer software.



2.4.2 道数：4096。

2.4.2 Highest roads: 4096.



2.4.3 包含信号增强处理。

2.4.3 Including signal enhancement processing.



2.5光路过滤模块Optical path filtering module:



2.5.1  降低X射线光路发送过程中的干扰，保证探测器接收信号准确。



2.5.1  Reduce the interference in the transmission process of X-ray optical path, and ensure the accuracy of the signal received by the detector.



2.5.2  将准直器与滤光处组合；

2.5.2 Combine the collimator with the filter;



2.6 准直器自动切换模块Collimator automatic switching module:



2.6.1 多种选择，口径分别为8、4、2、1、0.5mm。

2.6.1 There are many choices, and the diameters are 8, 4, 2, 1 and 0.5mm respectively.



2.7滤光片自动切换模块Automatic filter switching module:



2.7.1五种滤光片的自由选择和切换。

2.7.1 Free selection and switching of five kinds of filters.



2.8准直器和滤光片自由组合模块:

Collimator and filter free combination module:



2.8.1多达几十种的准直器和滤光片的自由组合。

2.8.1 Free combination of up to dozens of collimators and filters.



3.金属镀层专用分析软件

Special analysis software for metal coating



3.1 元素分析范围：从硫（S）到铀（U）。

3.1 Elemental analysis range: from sulfur (s) to uranium (u).



3.2 分析检出限可达0.01μm。

3.2 The detection limit can reach 0.01 μ m.



3.3 分析厚度一般为0.1μm至30μm之间。

3.3 The analytical thickness is generally between 0.1μm and 30 μ m.



3.4 多次测量重复性可达0.1μm（对于小于1μm的最外层镀层）。

3.4 The repeatability of multiple measurements can reach 0.1μm (for the outermost coating less than 1μm).



3.5 长期工作稳定性为0.1μm（对于小于1μm的最外层镀层）。

3.5 Long-term working stability is 0.1μm (for the outermost coating less than 1μm).



4.附件Annex



4.1 样品腔：开放式大样品腔。

4.1 Sample chamber: large open sample chamber.



4.2 标准样品：镀层标样。

4.2 Standard sample: coating standard sample.



5.产品保修及售后服务 

Product warranty and after-sales service



5.1 免费对客户方操作人员进行培训。



5.1 Free training for customers' operators.



5.2 安装、调试、验收、培训及售后服务均为免费在用户方现场进行。



5.2 Installation, commissioning, acceptance, training and after-sales service are all carried out free of charge at the user's site.



5.3正常使用，经本公司确认属工艺或材质缺陷引起的故障，且未经拆修，仪器自验收合格之日起保修壹年。



5.3 Normal use, confirmed by our company as a fault caused by process or material defects, and without repair, the instrument shall be guaranteed for one year from the date of acceptance.



5.4 产品终身维修（客户必须有填写详细、真实的有效购买凭证，保修卡等）。



5.4  Life-long maintenance of products (customers must have valid purchase vouchers, invoices, warranty cards, etc.).



5.5 免费提供软件升级。



5.5 Free software upgrades.



5.6 提供最有效的技术服务，在接到用户故障信息后，2小时内响应，如有需要，24小时内派人上门维修和排除故障。



5.6 Provide the most effective technical service, respond within 2 hours after receiving the user's fault information, and send someone to repair and troubleshoot within 24 hours if necessary.

苏州三值-EDX6000E系列镀层测厚，合金成分分析，rohs环保检测仪